A Review of Manufacturing Process of Polyethylene Pipes and Connectors for Applying in High-Pressure Natural Gas Pipelines
محل انتشار: فصلنامه علوم و فناوری ذرات، دوره: 1، شماره: 3
سال انتشار: 1394
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 465
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JPST-1-3_001
تاریخ نمایه سازی: 26 فروردین 1397
چکیده مقاله:
In this article various pipes used for transporting of gas are introduced and pros and cons of each one are elucidated. The pipes are categorized in three different subgroups including metallic, polymeric and metallic-wire reinforced polymeric pipes. Metallic- wire reinforced polymeric pipes are nominated as the best option for usage in high pressure pipelines transporting natural gas. As a result, some information about major manufacturers of this kind of polymeric pipes, raw material, production process and metallic-wire orientation are presented. Finally, from economical point of view, some calculations are done to estimate required amount of polymer and metallic-wire to manufacture such pipes. It is also possible to compare their manufacturing cost with usual metallic and polymeric pipes.
کلیدواژه ها:
نویسندگان
Omid Moini Jazani
Department of Chemical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran
Reyhaneh Khalafi
Department of Chemical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran
Mohammad Khosravi
Department of Chemical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran
Mohammad Reza Hassanpour
Research and Development Unit, Isfahan Gas Company, Isfahan, Iran